How to Install 3d Wall Panels?

How to Install 3d Wall Panels?

You want to make your interior walls look interesting but you don’t know how to install 3d wall panels. No worries, Fortesupplies has come up with a detailed solution for your problem.

Whether it is about your commercial or residential projects, 3D-wall panels offer an intriguing selection of textured wall panels for feature walls and other ornamental vertical surfaces. Feature walls made of 3D wall panels have a significant visual impact and inexpensively give a room an architectural character.

You could inquire, about “3d wall panels installation near me” and a bunch of results will be shown. But this article is especially for you if wanted to install and DIY 3d/ 4d wall panels to design your feature wall, tv wall, sofa backdrop, living room wall, etc.

Paneling a wall:

A bedroom, living room, or bathroom can easily and affordably be transformed in your home by installing paneling on the walls. In reality, you can use MDF Wall Paneling to completely change any room in your house, but it will take some preliminary measuring, math, and planning.

Paneling offers protection for the walls, and the parts of the house, such as the stairwell and hallway, where a wipe-clean paint finish makes maintenance simple. It may also make your less-than-perfect walls straight and provide a sleek framework, which is especially useful in bathrooms and kitchens when trying to conceal plumbing. This article on how to install 3d wall panels will describe every step of Installing 3d panels.

Installing common 3d wall panels peel and stick tile is one of the simplest methods to decorate a bare wall. When used as a decorative vinyl sticker, it is simple to apply and won’t leave any residue. To give a more aesthetic appeal to your living room walls, use a wall sticker. Continue reading to find out how to install a wall panel so it will survive for many years.

Guidelines on how to install 3d wall panels

3D wall panels are very easy to install. Typically, all you need to finish the installation are connectors and corner guards. Most manufacturers can adjust the wall panel’s length to match the wall’s height. You don’t usually have to cut it yourself.

However, because of their fixed specs and dimensions, certain installations require specific design needs. They are unable to fulfill the requirements for full board installation on-site. The paneling must be cut right now on-site. In this article, we’ll discuss how to cut and process wall panels properly on the job site.


Prepare a cutting machine, a measuring tape, safety goggles, a clean towel or cloth, and construction gloves before you start cutting. Prepare the location and gather the necessary supplies before you begin the installation process. The installation typically starts from the floor, but don’t think of the floor as a foundation of flatness. The suggested method is to mount an aluminium profile on the wall and measure the smoothness and equality. If the location is being redevelopment, ask the owner first if plinths are necessary or not.

Next, wipe the wall’s surfaces and apply primer to the basement as the wall becomes smooth and ready let it air dry after that.

Decorative panel cuts

Put on protective eyewear and work gloves before removing the wall panel that needs to be removed. Put it on the back after that to stop any powder or sparks from cutting from splashing on the panel’s finish layer.

Next, measure the plate that will be cut on-site with the tape measure, then mark the cutting spot. Use a cutting machine to make precise cuts in accordance with the measuring position.


Panels should be installed from left to right, taking angle cuts into consideration. Typically, 3D wall panels are cut, and it’s important to keep the monolithic image and correspond to the trims. Trim the gypsum mass at the angles by hand if the wall is a ramp. The situation is different with bas-reliefs because they are constructed with the accuracy of milometers using the exact wall proportions, negating the need for cutting. A graph and numbered panels are presented here. All the panels need to do is be smoothly aligned.

Cleaning of the finished product

After cutting, remove a clean cloth or rag and use it to carefully wipe the plate’s front and back of any remaining debris. to stop the iron filings that are created during the cutting from adhering to the plate’s surface and developing rust.

The basic procedures needed to cut wall panels are similar to those mentioned previously. Sometimes we have to build new forms throughout the installation procedure to match the design. In this situation, it is necessary to measure precisely in accordance with the construction plans and cut into the design effect all at once.

Filling the joints

The most important part of the installation is now the filling of the joints. After installation, it’s crucial to neatly complete adjustments and fill joints. Using a plastic spatula, add gypsum putty to the joints. Use a moist sponge to immediately remove any glue that has bled after applying each panel. Otherwise, since our 3D panels are ground more quickly than gypsum putty, panels may be damaged while being ground with sandpaper. That is a result of the putty’s thickness. If this step is not carried out carefully and softly, the surface will not be flawless. To avoid leaving behind traces, the sponge and water must always be clean when wiping the panel.

what glue to use for 3d wall panels

Choosing a top-notch professional glue that is perfect for attaching and sealing 3D wall panels will be the most effective. The one that is called WallArt Hybrid Adhesive is good for fixing 3D wall panels. There are different branded paneling adhesives available on the market that you can choose from.

How to install 3d wall panels in a reconstructed and furnished house:

Plan the installation of 3D panels in your furnished home without fear. Prepare your home by laying a translucent protective barrier from floor to ceiling all around the space.


Yes, it is the answer. Only you need to do certain steps. Depending on the paint, you might need to use sandpaper to scrape or scratch the surface before beginning installation. Installation is also not an issue if the wall is plasterboard. The flat, plastered wall is desirable in other situations.

3d wall panels gaming setup:

Unlike a complete home, the 3D wall panels gaming setup calls for nothing less than a luxury. Furniture must always place a strong emphasis on comfort, whether you wish to lounge with family and friends on a large sofa, a round dining table, or a swiveling gaming chair. Reclining seats could be very useful in the layout of the gaming space. Reclining couch sets are better for a comfortable and inviting gaming environment, as are standalone versions for the gaming room.

Understand the dos and don’ts

The following are interior designers’ top suggestions for a professional finish:

  • Try polymer moldings instead of MDF since they are lighter, easier to cut and apply, and frequently pre-primed and ready for painting. This makes them a better option for DIY beginners and results in a cleaner finish.
  • The likelihood is that your walls, floors, and ceilings are not perfectly straight, so don’t assume they are. Use a builder’s spirit level, or even better, a laser level, while fixing your chosen paneling, and make sure to leave adequate space at the top and bottom for variations in wall height.
  • Plan out your layout on every wall before you start; remember to cut once, and measure twice. A manual compound miter box and handsaw work great when paneling a small area. A small electric miter saw, will make the task much simpler.
  • Don’t forget to use a quick grab of the best adhesive for 3d wall panels to guarantee that your paneling adheres to the walls fast and doesn’t slide around.

Can A 3D wall panel break?

The majority of wall paneling materials are very long-lasting, simple to keep clean, and can be mounted on the ceiling to give the area a decorative appearance. The wall panels can either be installed on a metal grid frame that is screwed into the wall directly or on top of it. When 3D panels are mounted on a wall, they grow extremely sturdy and don’t break. The good news is that even broken panels may be easily fixed. There are a few things that can cause a wall to crack, which will harm the point of the 3D panels.

What could cause the wall to crack?

  1. When your neighbors are building their floor or ceiling while the wall is vibrating, for example. As a result, unlike panels placed directly, your 3D decorative wall can vibrate and split in joints.
  2. The 3D wall can also crack if the basement wall does so on its own.
  3. If a wall vibrates while construction is still being created, it could damage a 3D wall because the building will eventually become firmer.

How to repair 3D wall Panels

The transaction is somewhat challenging but doable. Excavate the damaged area of a panel, then fill it with high-quality, high-viscosity putty. Here, take on the role of a sculptor and finish the trimmings by hand and knife. Next, lightly sand the joints. Spray primer on the wall after which the entire surface is painted.

Above all, if a circumstance arises where you must set aside room for electrical outlets, air conditioners, fans, etc. The cut must be remeasured and marked using the current circumstances.

We hope all the above information will help you understand “how to install 3d wall panels” when you want to do it yourself. Get in touch with a professional in your neighborhood or another appropriately certified person for a professional installation.


1. How Do You Use a 3D Panel?

A 3D panel is a structure of decorative material for walls with a rectangular-sized pattern and the texture is three-dimensional. They are utilized to cover walls and fill up exposed or visible wall surfaces. Wall panels provide insulation and soundproofing in addition to having a uniform appearance and are designed for both decorative and practical purposes.

2. What Do You Cut 3D Wall Panels With?

Power tools or an ordinary utility knife can be used to cut through wall flats. To lessen pulp flare when using power tools, it is advised to apply painter’s tape along cut or drill lines.

3. Which Glue is Best for 3D Wall Panels?

The 3D Wall Panels can be attached using studs, noggins, and over already-existing walls using a flexible construction adhesive or stud glue adhesive.

4. How Do You Install Decorative Wall Panels?

The installation process required some steps to follow – Cutting the wall panel to the desired length. Then level and secure the packers. Leveling the first panel. Hammering each panel before stacking. Making holes or leaving a bare spot. Installing the L-trim and cover slat. Then finally removing the cover.

5. How Do You Hide Seams in Decorative Wall Paneling?

Applying prepared joint compounds over unattractive seams is a straightforward way to cover them up. The compound produces a smooth surface that may be easily refinished with a fresh coat of paint with careful sanding. Paneling doesn’t even need to come down before you can begin rebuilding!

Leave a Comment

You must be logged in to post a comment.