How to Install Exterior Wall Cladding

How to Install Exterior Wall Cladding
Posted in ,

There are many factors to take into account when installing exterior wall cladding. 

What is the best cladding for your home’s exterior? What are some things to consider when choosing a material? How do you install it correctly?

You might get overwhelmed if it’s your first time installing wall cladding for your home’s exterior. However, you should not worry because it’s normal. This is especially true since you’re new to it.

So, what steps will you need to take when installing exterior wall cladding? Here are a couple of things to consider.

Things to Consider Before You Start

Before you try to clad an external wall, many professionals recommend that you check with local building codes for any limitations or requirements.

In addition, you’ll also have to think about other factors that might affect the results of your project. Some of these factors include:


Before starting your cladding project, you must plan a layout first. This will help you guarantee the best possible results for the job. 

In general, zoning ordinances and building codes apply to permanent structures. This means it applies to anything attached to your home or anchored to the ground.

Thus, almost every type of cladding requires inspections and permits from a local building department. 

Experts suggest you create a site plan for your proposed project. This will help you make your perfect exterior wall cladding and lower errors.


To properly install the wall cladding, you will need a strong, flat, smooth, and clean surface. 

Also, before installing any cladding, it’s best to check with local building codes. 

If you can’t install the wall cladding immediately, store it on a flat surface. You should not put your wall cladding sheets on a surface that isn’t flat.


Before installing any wall cladding, you must consider the necessary tools. Most importantly, you will need a hammer and nails. 


But you will also need a saw to cut the boards to size and a level to make sure they are level when you install them. You may also want to rent a power drill to complete the job faster. 

In addition, you will need to choose the right kind of nails. For most applications, hot-dipped galvanized nails are the best choice. 

These nails have been treated to resist corrosion so that they will last longer than untreated. 

Finally, remember to wear safety glasses when working with power tools. By taking these precautions, you can ensure that your cladding installation will go smoothly.


It is essential to consider your safety before you install wall cladding in your home. 

While wall claddings are a great way to improve the look of your home, they can also be a hazard if you don’t install them correctly. This is particularly true if you’re cladding over brick wall.

In addition, wall claddings can also be a fire hazard if they are not made from fire-resistant materials. 

To ensure your safety, it is essential to consult a professional before installing wall cladding in your home. 

They will be able to advise you on the best type of exterior wall cladding for your home and help you to avoid any potential hazards.

How to Install Exterior Wall Cladding

Now that you know what to consider before installing the wall cladding, you’ll need to learn how to install it properly. 

Always note that the methods you’ll utilize to install external cladding can differ depending on what type of material you pick.

However, the installation and preparation processes are the same in general.

So, how to properly install cladding to the exterior of your house? Here are the steps you need to follow:

Things You Will Need

Things You Will Need
  • House wrap
  • Corner pieces and trims
  • Foam insulation
  • Skill saw
  • Drill
  • Any type external cladding you prefer
  • Nails or galvanized screws
  • Plywood sheathing
  • Tape measure

Step 1: Measure the Exterior Walls

You’ll have to measure the width and length of the walls before you fit any vertical wall cladding. This will allow you to get the correct amount of external wall cladding boards for the walls.

In addition, you’ll have to take additional measurements of the area around the doors and windows. You will need these measurements for corner pieces and trims.

Step 2: Fit All the Sheathing

Before installing any type of cladding to the exterior of your house, ensure that you fit all the plywood sheathing.

Step 3: Foam Insulation and House Wrap

This is perhaps one of the most crucial steps in installing exterior cladding. Unfortunately, a lot of homeowners forget or ignore this step. 

This step is essential if you want to achieve weather protection and energy efficiency for your home. You have to install foam insulation and house wrap.

Ensure that you use building wrap to exterior walls of your house with a house wrap that you prefer and staple them in place. Next, install the panels of foam insulation by nailing them.

Step 4: Install the First Row of Exterior Cladding

After successfully installing the insulation for your home, the next step is to install the cladding. When doing this step, ensure that you start from the bottom of your home. 

Also, you should not hurry. At this step, you need to take your time since the first row of cladding is the foundation of the entire structure. 

You have to guarantee that the first row of cladding is straight to guarantee the next rows are level as well. 

Step 5: Installing the Other Claddings

Installing the Other Claddings

After installing the first row of exterior cladding, the next step is to install the rest. 

Take note that the upper should overlap the top part of the bottom board, especially if you utilize metal siding, vinyl siding, wood siding, or cement boards.

Doing this will help avoid water from leaking at the back of the material. On most occasions, you will notice a line on the material. This will help guide you on where to overlap them.

Step 6: Installing Corner Pieces and Trims

After installing all the cladding on your exterior walls, the next step is to install the finishing touches. This includes corner pieces and trims. 

Most wall claddings have finishing pieces that help protect your wall and make it look appealing. 

Ensure that you fit the finishing touches in this stage. 

Step 7: Repeat the Steps for the Other Walls

After installing the exterior wall cladding on one side of your home, you simply have to repeat these steps on the other. 

Tips for Installing Wall Cladding

External wall cladding can be a great addition to your home. Aside from providing an additional layer of protection, it also helps improve the curb appeal of your property.

For most designers, architects, and homeowners, laminate wall cladding is their go-to option. However, you should note that you can consider other wall cladding forms.

Of course, you are probably a DIY enthusiast if you’re reading this article. Now that you know the steps in installing exterior wall cladding, you should learn some tips to make your life easier.

Don’t Forget to Measure the Space 

You shouldn’t forget to measure the space. This is important because you need to know how much cladding you need and what size pieces will fit the area best. 

Measuring of exterior walls cladding will also help you determine the placement of the cladding so that it looks evenly distributed on the wall. 

Don’t Forget to Measure the Space

To measure the space, use a tape measure and mark off the area with chalk. Once you have your measurements, transfer them to a piece of paper so you can easily reference them when ready to install the cladding. 

This simple tip will ensure that your wall cladding is installed correctly and looks great!

Prepare the Wall

Before installing any composite wall cladding system, you must ensure the wall is in good condition. 

First, check for cracks or other damage. If you find any, repair them before proceeding. Next, clean the wall surface to remove any dirt or debris. 

Once the wall is clean and dry, you can start installing the cladding. 

For best results, follow the manufacturer’s instructions carefully. With some preparation, you can ensure that your new wall cladding will last for years.

Ensure Proper Maintenance and Care

Now that you’ve installed wall cladding, it’s essential to ensure proper maintenance and care to prolong its beauty and lifespan. Here are some tips: 

First, avoid using harsh cleaners or chemicals as they can damage the finish. Instead, opt for mild soaps and warm water. 

Second, regularly dust and clean the area to prevent the buildup of dirt and grime. 

Third, if there are any scratches or marks, you can use a soft cloth to buff them out. 

Fourth, re-seal the area every few years to keep the finish looking fresh. 

Following these simple tips can help maintain your wall cladding for many years.


What is Exterior Wall Cladding?

Wall cladding is an exterior finishing system that’s purpose is to protect the structural integrity of the building as well as provide a decorative finish. 

The systems are available in various materials such as aluminum, brick, stone, Vinyl, wood, and composite. 

Exterior wall cladding can be used on commercial and residential projects and can add to the curb appeal of any property.

 Some of the most popular types of cladding are brick and stone, but there has been a recent trend toward using composite materials. 

Composite cladding is made from recycled plastic and wood fiber, making it an environmentally friendly option and very durable. 

What are the Benefits of Wall Cladding?

While it is often used for decorative purposes, wall cladding can also provide several benefits. 

For example, it can help to protect walls from damage, reduce noise levels, and improve insulation. 

In addition, wall cladding can be used to hide imperfections or create the illusion of more space. As a result, it is an increasingly popular choice for homeowners and businesses alike.

How Do You Apply Exterior Wall Cladding?

There are a few different ways to do it, depending on the type of cladding you’re using. 

For stone or brick cladding, you’ll need to attach it to the wall with mortar or another adhesive. If you’re using metal cladding, you can either screw or bolt it into place. 

Wooden cladding can be nailed or screwed into place. 

Whichever method you choose, ensure the cladding is adequately sealed, and there are no gaps between the panels. This will help keep your home protected from the weather and pests.

How Do You Prepare a Wall for Cladding?

Before you can add cladding to a wall, you need to do some preparation. This includes making sure the wall is clean, dry, and smooth. You also need to assess the wall for any damage that could affect the cladding.

How to Choose Exterior Wall Cladding?

As mentioned earlier, wall claddings are available in a variety of materials. Some of the most common materials include aluminum, brick, stone, Vinyl, wood, and composite materials. 

When deciding which type of cladding is right for your project, several factors, such as the building’s location, climate, anticipated maintenance, and budget, must be considered.

If you don’t know how to choose exterior cladding, you can always ask a professional for help.


Leave a Comment

You must be logged in to post a comment.