How to install corrugated metal on interior walls? This is one question that a lot of homeowners ask when planning to decorate their rooms.
Unless you’ve been living under a rock, you have probably heard of corrugated metal. You can easily find them on building exteriors, barn roofs, or sheds.
People use corrugated metal to help protect the structure behind it against the elements. Even though it has an industrial or rustic design element, you can install corrugated metal on wall. Instead of corrugated metal you can also use reclaimed wood for the accent walls. Learn how to install reclaimed wood accent wall for an antic look.
Aside from that, corrugated metal panels are easy to install. You don’t need to hire a professional or have a lot of experience working with metal panels.
You may be surprised just how simple it is to install a corrugated metal half wall. You might be even more surprised at how great they can look anywhere in your house.
Many years ago, people would only use corrugated metal panels for covering the exterior sides of barns and the roof of a property.
Today, the clean and nice appearance of metal can be utilized all over your house. You’ll be surprised at all of the amazing colors and finishes available.
However, before you can start hanging corrugated metal on walls, there are a couple of tools you’ll need. This includes:
- Power drill
- Flashing tape
- Waterproof membrane
- Utility knife
- Self-adhesive underlay
You’re going to need corrugated metal panels if you are trying to install an interior corrugated metal wall.
The most affordable and easiest option for you is to purchase your panels at your nearest home improvement store.
These establishments usually have standard 8 x 14-foot, 29-gauge panels. The biggest drawback of buying from a local home improvement store is that you’ll be limited when it comes to panel and color options.
Usually, these stores only have conventional and standard colors. If you are searching for more design choices and a huge variety of finishes and colors to choose from, professionals recommend you look through online stores.
Aside from all the traditional colors, online stores also have panels with special finishes that you will not find in your local home improvement store.
The only drawback of this is that you’ll have to wait for the items to be delivered.
How to install corrugated metal on interior walls? Well, there are two ways to install corrugated metal for walls. You can do it horizontally or vertically. If you want to do it horizontally, you won’t need any wall preparation.
On the other hand, you will need to install horizontal furring strips if you want to install corrugated metal panels vertically.
You will need to use 1×2 boards to install furring strips. These boards will run the whole length of the wall. You should begin at the lowermost part of your wall. Next, attach the first strip 1-inch above the level of the floor.
Attach the other strips 25-inches at a distance. Then, finish with another strip at the top. Every time a strip crosses a wall stud, insert a screw. Usually, studs are 15 to 25 inches apart.
Now that you’ve prepared your walls, the next thing you need to do is the entire corrugated metal panel installation process.
Before installing the wood, you’ll want to weather seal the wood boards using the correct sealant. This will help prevent them from rotting due to the elements.
Before you begin cutting any materials, you need to measure your wall first. This will enable you to know how much you need.
For instance, if you’re planning to build an accent wall that is 7 feet high and 15 feet wide, you can utilize these measurements to scale down or up to your desired wall size.
Step 3 – Creating the Support Frame
The support frame is the foundation of your whole project. So, whenever you’re wondering How to install corrugated metal on interior wall, you need to consider the support frame first.
You should begin by cutting 3 wood boards down to the length that matches your wall’s height.
Next, use concrete anchor screws to attach the 3 boards to the wall. The boards should be 6 inches apart from the top and bottom of every piece.
For extra support, consider installing a third anchor in the middle of every panel.
The next step is to mark your wood pieces at every location of the anchor. Next, drill a hole at every mark using a ¼-inch drill bit.
Then, replace your ¼-inch drill bit with a spade drill bit and carve out a ¼-inch notch at every mark. This will enable the washer and screw to fall flush into the beam when installing the panels.
If you’re planning on hanging corrugated metal on walls vertically, you can begin at one side of the wall and place the panel at least ½ inch off the floor.
Installing the metal panels will require at least 2 people. Thus, you might need to ask someone for help. One person will hold the panels in place while the other will insert the screws.
To avoid rusting of the panels, you need to raise them so that the bottom metal won’t get wet. Next, insert screws around 8-inch apart into each furring strip.
Overlap the next panel and keep on inserting screws.
If you want to install corrugated tin on walls horizontally, find the wall studs using a stud finder and pop a chalk line over each stud.
You can begin with the bottom panel, raising it ½ inch off the floor and installing screws, 8-inch apart over each wall stud.
Now that you know how to install corrugated metal on interior walls, you can start the project with ease.
The process will always be the same, whether you’re installing metal panels on a roof, on ceilings, or on walls.
You can directly install corrugated tin walls to studs or on top of an old sub-surface. This can include drywall or plywood.
If you want to install corrugated metal panels over an old surface, use a pencil to mark the studs before installing them. This allows you to easily see where to line up the screws.
Keep in mind that the screw pattern is one major element of metal ceilings or walls that can make a huge difference in the final look of the project.
Thus, it’s always ideal to keep the fasteners lined up as you install the panels. This will help you achieve an appealing finished look.
For those who don’t know, corrugated metal is a metal sheet that’s roll-formed into metal panels. Traditionally, the shape of the corrugated metal panel is wavy and round.
It’s easy to install, long-lasting, energy-efficient, durable, lightweight, and affordable. Corrugated metal is a great alternative to clay tile or asphalt shingle roofs.
Is your corrugated metal damaged? Well, the only way to fix this is to replace the damaged panel. Fortunately, you won’t have to completely remove all of the panels.
All you have to do is to get rid of the damaged panel and replace it with a new one.
One of the ideal ways to integrate metal panels inside your house is accent walls. The reason for this is that they improve any room.
Utilizing metal as a wall can also help protect your house from nicks and damage. In addition to that, metal is extremely low maintenance and easy to clean. It is an ideal option for any room.
It’s vital to properly install or drive the screws. It’s an easy process. However, most homeowners do it incorrectly.
When installing screws, you should not drive it sideways. It needs to be installed straight. If you tilt or install them sideways, it won’t permit the rubber washer to seal properly.
This will produce a potential leak point.
There are tons of benefits to utilizing corrugated metal for ceilings. This includes no painting needed, no maintenance, and improved aesthetics.
So, the answer to this question is yes. You can utilize corrugated metal for a ceiling.